A3 Quattro V6-3.2L (CBRA) (2009)
Drive Belt: Service and Repair
Ribbed Belt
Ribbed Belt
Special tools, testers and auxiliary items required
‹› Locking Pin (T10060 A)
Removing
‹› Before removing the ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed direction of rotation can cause damage to
the belt under operating conditions.
-
Swing tensioning device in direction of - arrow - to relieve tension on the ribbed belt and then lock it in place using the (T10060 A).
-
Remove the ribbed belt from the generator belt drive pulley.
-
Remove center noise insulation fasteners - 1 to 3 -.
-
Remove right noise insulation fasteners - 1 to 3 -.