A3 Quattro V6-3.2L (CBRA) (2009)
Fuse Block: Service and Repair
Relay and Fuse Holder B
Relay and Fuse Holder B
Observe notes on contact corrosion => [ Contact Corrosion ] See: Power and Ground Distribution/Wiring Harness/Service Precautions.
Removing
-
With ignition switched off, disconnect battery Ground (GND) wire => [ Battery, Engine Compartment, Disconnecting and Connecting ] See:
Starting and Charging/Battery/Service and Repair/Removal and Replacement/Battery, Engine Compartment, Disconnecting and Connecting.
Vehicles with the old version E-box:
-
Press the retaining clips in - direction of arrow - and remove the E-box cover.
Vehicles with the new version E-box:
-
Slide both latches in - direction of arrow - and remove the E-box cover.
All Vehicles