A3 Quattro V6-3.2L (CBRA) (2009)
/Page-302002.png)
conditions.
-
Swing tensioning device in direction of - arrow - to relieve tension on the ribbed belt and then lock it in place using the (T10060 A).
-
If equipped, remove vacuum hose - 2 - to air guide hose.
-
Disconnect air guide hose - 1 - at throttle valve control module (J338).
-
Disconnect mass air flow (MAF) sensor (G70) electrical connector - 3 -.
-
Remove upper section of air filter housing - arrows -.
-
Remove filter element.
-
Pull off air guide cover - 1 -, disengage clips sideways to do so.
