A3 Quattro V6-3.2L (CBRA) (2009)
Wiper Control Module: Service and Repair
Windshield Wiper Motor Control Module
Windshield Wiper Motor Control Module
Observe notes on contact corrosion => [ Contact Corrosion ] See: Wiper and Washer Systems/Service Precautions.
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Select the function or path:
-
Follow further instructions on display of (VAS 5051B).
-
Remove the wiper motor: vehicles through 05.2008 => [ Windshield Wiper Motor with Wiper Motor Control Module, through 05.2008 ] ,
vehicles from 06.2008 => [ Windshield Wiper Motor with Wiper Motor Control Module, from 06.2008 ] See: Windshield Wiper Motor with
Wiper Motor Control Module, From 06.2008.
-
Pry the drive rod - arrow - off the wiper motor crank using the pry lever (80-200).
-
Remove nut - 1 -.