A3 Quattro V6-3.2L (CBRA) (2009)
Tightening Specifications
Connector, Attaching to Airbag Unit
Disconnecting
CAUTION!
Follow the safety precautions for pyrotechnic components.
-
Remove driver side airbag unit. Refer to => [ Driver Airbag Unit ].
CAUTION!
Before handling pyrotechnic components (e.g. disconnecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
-
Disconnect electrical connections - 2 - and - 3 - on airbag with screwdriver - 1 -.
Connecting
CAUTION!
‹› Follow the safety precautions for pyrotechnic components.
‹› Before handling pyrotechnic components (e.g. connecting the electrical connector), the person handling it must "discharge static
electricity ". This can be done by touching door striker, for example.
Installation is reverse of removal, but note the following:
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.
-
Install driver side airbag unit.
Steering Wheel