A3 Quattro V6-3.2L (CBRA) (2009)
-
Remove the bolts - 1 - and - 3 - on the Seat Occupied Recognition Control Module (J706) - item 2 -.
-
Free up the clip on the electrical wiring harness - 7 -.
-
Remove the electrical connectors - 5 - and - 6 - from the brackets; while doing this, press the securing catch and pull the electrical connectors out
of the bracket.
-
Unlatch the clips - arrows - and press the clip - 1 - for the passenger occupant detection system mat out of the seat pan.
-
Carefully unlatch the front clips - 3 - and - 5 - on the seat pan using the pry lever (80 - 200 ).