A3 Quattro V6-3.2L (CBRA) (2009)
Seat Belt Height Adjuster: Service and Repair
Seat Belt Height Adjuster
1
Seat Belt Height Adjuster
Removing
-
Remove lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Service and Repair/Removal and
Replacement/Trim.
-
Remove the rear bench seat. Refer to => [ Rear Bench Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seats.
-
Remove sill panel trim. Refer to => [ Sill Panel Trim ] See: Body and Frame/Interior Moulding / Trim/Service and Repair/Removal and
Replacement/Trim.
-
Press button - 5 - and slide belt height adjuster into bottom position.
-
Remove upper B-pillar trim - 7 -. Refer to => [ Upper B-pillar Trim ] See: Body and Frame/Interior Moulding / Trim/Service and Repair/Removal
and Replacement/Trim.
-
Remove the bolt - 3 -.
-
Remove belt relay - 2 -.
-
Remove the bolt - 4 -.
-
Slide belt height adjuster - 1 - upward and remove it from side panel.