A3 Quattro V6-3.2L (CBRA) (2009)
CAUTION!
Risk of injury from refrigerant.
‹› The air conditioning refrigerant circuit must not be opened.
-
Remove bolts - arrows -.
-
Secure A/C compressor with refrigerant hoses attached to front of noise insulation frame.
-
Disconnect electrical connector - arrow - on oil pressure switch (F1) with (T10118).
-
Remove oil pressure switch (F1).
Installing
‹› Tightening specifications, refer to => [ Oil Cooler and Oil Filter Housing Assembly Overview ] See: Engine, Cooling and Exhaust/Engine/Engine
Lubrication/Oil Cooler/Service and Repair/Oil Cooler and Oil Filter Housing Assembly Overview.
Installation is in reverse order of removal, note the following:
-
Install A/C compressor.
-
Install ribbed belt. Refer to => [ Ribbed Belt ] See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Ribbed Belt.