A3 Quattro V6-3.2L (CBRA) (2009)
Discharge Air Temperature Sensor / Switch: Service and Repair
Right Vent Temperature Sensor
Right Vent Temperature Sensor
‹› Not installed on vehicles with manually regulated A/C system
Removing
-
Switch off ignition.
-
Remove the glove compartment. Refer to=> See: Body and Frame/Interior Moulding / Trim/Utility Storage Compartment/Service and
Repair/Storage Compartments and Covers/Glove Compartment.
-
Disconnect harness connector - A - from temperature sensor.
-
Turn temperature sensor - B - approximately 90°.
-
Remove temperature sensor - B - from air guide.
Installing
-
Install in reverse order of removal.
-
Check seal - C - for proper seating when installing.