A3 Quattro V6-3.2L (CBRA) (2009)
Fuel Gauge Sender: Testing and Inspection
AWD Version 2
Fuel Level Sensor, Checking
Special tools, testers and auxiliary items required
‹› Hand-held multimeter (V.A.G 1526C)
‹› Connector test set (V.A.G 1594C)
Test Sequence
-
Remove rear seat bench
-
Unclip catches - arrows - of right connector flange cover.
-
Disconnect electrical harness connector - arrow - at locking flange.
Vehicles through approximately 11/2004:
‹› On vehicles with 2-wire sensor technology, the connector for fuel level sensor (G) is equipped with 4 terminals.
-
Connect multimeter between terminal - 2 - and - 3 - for resistance measurement.