A3 Quattro V6-3.2L (CBRA) (2009)
Steering Gear: Service and Repair
Electromechanical Steering Gear
Electromechanical Steering Gear
Special tools, testers and auxiliary items required
‹› Ball Joint Puller (3287 A)
‹› Torque Wrench (VAG 1331)
‹› Torque Wrench (VAG 1332)
‹› Engine/Transmission Jack (VAG 1383 A)
Removing
-
Disconnect battery.
-
Remove nuts - arrows - and remove foot well trim.
-
Remove bolt - 1 - and remove the universal joint - 2 - from the steering gear.
-
Remove front wheels.
-
Loosen tie rod end nut, but do not remove yet.
-
Press tie rod end off of wheel bearing housing using ball joint puller (3287 A).