A3 Quattro V6-3.2L (CBRA) (2009)
‹› With power steering control module
‹› With electromechanical power steering motor
‹› With engine speed sensor
‹› Can be tested in "Guided Fault Finding" using the Vehicle Diagnosis, Testing and Information system (VAS 5051B )
21
Clip
22
Contact Foil
‹› Not an individual component, is installed on the thrust piece
‹› Coat with supplied grease (G 052 192 A1) on contact side facing steering rack
23
Hydraulic Thrust Piece
‹› Removing and Installing, refer to => [ Hydraulic Thrust Piece ] See: Hydraulic Thrust Piece
24
Seal
‹› Installed on the hydraulic thrust piece
25
Seal
‹› Insert into steering gear housing between thrust piece and adjustment bolt
26
Adjustment Bolt
‹› For the hydraulic thrust piece
‹› Always replace
27
Rubber Plug
28
Adjustment Bolt
‹› For the mechanical thrust piece
‹› Always replace
29
Spring
30
Seal
‹› Installed on the mechanical thrust piece
31
Mechanical Thrust Piece
‹› Removing and Installing, refer to => [ Thrust Piece, Steering Pinion Side ] See: Thrust Piece, Steering Pinion Side
32
Contact Foil
‹› Not an individual component, is installed on the thrust piece
‹› Coat with supplied grease (G 052 192 A1) on contact side facing steering rack
33
Hex Nut
‹› 25 Nm
‹› Always replace after removal
34
Screw Plug