A3 Quattro V6-3.2L (CBRA) (2009)
Front Subframe: Removal and Replacement
FWD
Subframe with Attachments
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1332)
‹› Engine/Transmission Jack (VAG 1383 A)
Removing
-
Remove wheels.
-
Remove diagonal brace if installed. Refer to => [ Diagonal Braces ] See: Rear Subframe/Service and Repair/Removal and Replacement/Diagonal
Braces.
-
remove coil springs. Refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension/Coil Spring.
-
Remove exhaust system rear muffler.
-
Disconnect and unclip the wires from the ABS speed sensor and connectors on vehicles with automatic headlamp range control.
-
Remove bolt - 2 - and washer - 1 -.
The washer - 1 - is installed on vehicles with an aluminum wheel bearing housing.
-
Pry off the securing clip - 1 - for the brake cable.