A3 Quattro V6-3.2L (CBRA) (2009)
Rear Subframe: Removal and Replacement
Diagonal Braces
Diagonal Braces
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1331)
‹› Torque Wrench (VAG 1332)
Removing
-
Remove bolts - 1 - through - 4 - and remove diagonal braces.
Installing
Installation is in reverse order of removal, noting the following:
‹› The contact surfaces on the diagonal braces must be free of wax.
Tightening Specifications, refer to => [ Subframe, Diagonal Brace, Transverse Links, Tie Rod and Level Control System Sensor Assembly Overview ]
See: Subframe, Diagonal Brace, Transverse Links, Tie Rod and Level Control System Sensor Assembly Overview