A3 Quattro V6-3.2L (CBRA) (2009)
‹› Always follow the order of the following work steps.
-
Install trailing link and mounting bracket with bolts - arrows - on wheel bearing housing but do not yet tighten.
-
Insert coupling rod - 1 - in trailing link, do not tighten nut yet.
-
Lift suspension using engine/transmission jack ( VAG 1383 A) and wheel hub support (T10149) until mounting bracket makes contact with body.
-
Tighten bolts - arrows - on old impression.
-
Lower suspension back using engine/transmission jack (VAG 1383 A) and remove wheel hub support ( T10149) from wheel hub.