A3 Quattro V6-3.2L (CBRA) (2009)
The washer - 1 - is installed on vehicles with an aluminum wheel bearing housing.
-
Place trailing arm on wheel bearing housing with bolts - arrows - but do not tighten yet.
-
Install coil spring. Refer to => [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension/Coil Spring.
-
Tighten bolts - arrows -.
-
Tighten coupling rod - arrow - on trailing arm.
-
Install cover plate.