A3 Quattro V6-3.2L (CBRA) (2009)
/Page-864003.png)
-
Remove connection from bracket - 2 - and free up wiring to the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130).
-
Remove front crossmember for vehicle floor - arrows -.
‹› To prevent damage, decoupling element of the front exhaust pipe must never be angled by more than 10°.
-
Disconnect exhaust system at clamping sleeve - 1 -.
-
Remove bracket for exhaust system - arrows -.
-
Tie up the front exhaust pipe to the vehicle floor.
