A3 Quattro V6-3.2L (CBRA) (2009)
Shifter A/T: Removal and Replacement
Shift Mechanism Function Unit
Shift Mechanism Function Unit
Removing
Vehicles with selector mechanism cover:
-
Remove selector lever handle => [ Selector Lever Handle ] See: Selector Lever With Boot/Selector Lever Handle.
-
Switch ignition off.
-
Remove cover for shift mechanism => [ Selector Lever Boot, Separating from Selector Lever Handle ] See: Selector Lever With Boot/Selector
Lever Boot, Separating From Selector Lever Handle.
Vehicles with shift lever boot:
-
Remove selector lever handle => [ Selector Lever Handle ] See: Selector Lever With Boot/Selector Lever Handle.
-
Switch ignition off.
-
Remove selector lever scale illumination (L101 ) => [ Selector Lever Scale Illumination ] See: Selector Lever With Boot/Selector Lever Scale
Illumination.
All Vehicles
-
Remove the ashtray or storage compartment in front of the selector mechanism
-
Disconnect connector - A - from selector mechanism function unit leading to the vehicle wiring harness.
‹› Ignore - B -, - C - and - 1 -.
Vehicles with 2.0 Liter TFSI engine: