A3 Quattro V6-3.2L (CBRA) (2009)
Flywheel: Service and Repair
Dual Mass Flywheel
Dual Mass Flywheel
‹› When working on the engine, secure the engine to the engine and transmission support. Refer to => [ Engine, Securing to Engine and
Transmission Holder ] See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine, Securing to Engine and
Transmission Holder.
Special tools, testers and auxiliary items required
‹› Counter-Holder Tool (T10069)
Removing
‹› Transmission removed.
-
Mark dual-mass flywheel to engine.
‹› To prevent damage to dual-mass flywheel when removing, bolts - B - must not be removed using an air-powered or impact wrench. Only
removing bolts by hand is permitted.
-
Rotate dual-mass flywheel - A - so that bolts stand centered to holes - arrows -.
-
When removing bolts, make sure that no bolt head makes contact on dual-mass flywheel because it will otherwise be damaged when further
screwing the bolt.
-
Remove dual-mass flywheel while counter holding vibration damper with (T10069).