A3 Quattro V6-3.2L (CBRA) (2009)
Shift Indicator: Service and Repair
Selector Lever Transmission Range Position Display
Removing
-
Position selector lever in "N" position.
-
Switch off ignition and remove ignition key.
-
Unclip mounting frame for selector lever boot - 1 - from center console and lift it upward - arrows -.
-
Fold selector lever boot upward.
-
Unclip selector lever cover frame - 1 - from center console and raise it up - arrows -.
-
Remove the selector lever cover.
-
Unplug connector.
-
Release the retaining springs - arrows - and remove the trim frame and display unit for the selector lever position - 2 - on the selector lever cover
- 1 -