A3 Quattro V6-3.2L (CBRA) (2009)
/Page-2302001.png)
Windshield: Service and Repair
Windshield Assembly Overview
Windshield Assembly Overview
1 - Windshield
‹› Removal and installation=> [ Windshield ] See: Windshield
2 - Window adhesive
‹› Note varying spacing dimensions to window edge
‹› Observe curing times.
3 - Gap cover
‹› Is cut through by cutting cord when removing window.
‹› Can be replaced separately => [ Replacing Gap Cover ].
4 - Plenum Chamber Cover
‹› Press into fastening strip only after window adhesive curing time has elapsed.
‹› Before installing, first remove protective piping on new window => [ Removing Protective Tubing ].
5 - Retaining strip for plenum chamber cover
