A3 Quattro V6-3.2L (CBRA) (2009)
Install in reverse order of removal, observing the following:
-
Check the sealing grommet - 1 - for damage.
-
From above, push the headlamp washer pump (V11 ) - item 2 - into the windshield washer fluid reservoir; while doing this the pump is guided by
both mounting tabs - arrows -.
-
Install fog lamp => [ Fog Lamp, through 05.2008 ] .
-
Install the front section of the front right wheel housing liner
Headlamp Washer System Spray Nozzles
Left side of the vehicle:
-
Remove the front wheel housing liner => Body Exterior
66 Removal and Installation.
Right side of the vehicle:
-
Remove front bumper cover Removal and Installation.
Continuation for both sides of the vehicle: