audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Customer Interest for Seat Heater Control Module:|871116|Page 25 > < All Technical Service Bulletins for Navigation Module:|911038|Page 18
Page 1
background image

Seat Heater Control Module: Customer Interest
Interior, A/C - Seat Heaters Don't Get Hot Enough

87 Heated Seats do not get hot enough

87 11 16 

2025244/1 

January 21, 2011.

AFFECTED VEHICLES

CONDITION 
The customer complains the heated seats do not get hot enough or the heating performance is low.

TECHNICAL BACKGROUND
The maximum target temperature for the heated seats was reduced starting with the change over to the 2009 A3 product improvement.

PRODUCTION SOLUTION 
Optimized software (version 0170) for the Climate Control Unit (J255) with improved seat heating performance was introduced in to production.

SERVICE

1. Follow all instructions in the attached TSB 2011732 00 Software Version Management (SVM), operating instructions.

2. Update the Climate Control Unit (J255) using the SVM action code as listed in the table above if necessary. This new software provides improved seat
heating performance.

3. During the update the system will provide three separate updates to the climate control unit. The ignition will need to be manually cycled after each
update. It is critical that all three updates are preformed!

Tip: Performing the software update using the Audi Flashing - SVM for problem related update" will limit the user interaction required. The technician
will still be required to cycle the ignition after each one of the three updates is completed.

Customer Interest for Seat Heater Control Module:|871116|Page 25 > < All Technical Service Bulletins for Navigation Module:|911038|Page 18