A4 V6-3.0L (AVK) (2004)
Trunk / Liftgate Latch: Service and Repair
Lid Lock and Handle Mechanism, Removing and Installing
Lid Lock And Handle Mechanism, Removing And Installing
1
-
Rear lid lock
-
To remove, unclip operating rod from swivelling bush and disengage.
-
Unscrew hex nuts - 3 - and remove rear lid lock.
2
-
Swivelling bushing
-
After installing rear lid lock, engage operating rod and secure.
3
-
Nut
-
8 Nm
4
-
Operating rod
5
-
Bowden cable
6
-
Lock cylinder
-
Removing:
-
Disconnect electrical harness connectors.
-
Disengage Bowden cable - 6 - from lock cylinder.
-
Remove combination bolt - 7 -.
-
Twist lock cylinder 90 degrees.
-
Remove lock cylinder from handle mechanism.
7
-
Combination bolt
-
8 Nm
8
-
Engine
-
Removing and installing.
9
-
Grip piece
-
Removing:
-
Rear lid trim removed.
-
Lock cylinder removed.
-
Remove hex head collar nuts - 10 -.
-
Press in catches - arrows -.
-
Remove grip piece.
10 -
Hex head collar nut