A4 V6-3.0L (AVK) (2004)
Trunk / Liftgate Lock Cylinder: Service and Repair
Lock Cylinder For Rear Lid, Removing And Installing
Removing
-
Remove rear lid trim.
-
Disconnect electrical harness connector - 2 -.
-
Disengage actuating link - 3 - to rear lid lock.
-
Remove bolt - 1 -.
-
Tightening torque: 8 Nm
-
Turn lock cylinder 90 degrees around its own shaft and remove lock cylinder.
Installing
Installation is performed in the reverse order of removal.