A4 V6-3.0L (AVK) (2004)
Headliner: Service and Repair
Wiring Harness Routing on Rear Side or Molded Headliner (Sedan)
Wiring Harness Routing On Rear Side Or Molded Headliner
1
-
Rear side of molded headliner
Molded headliner removed (placed on seats).
-
Disconnect connector - 4 -.
-
Separate connectors - 5 -.
-
Disconnect connector - 6 -.
-
Remove cable to sun visor - 8 -.
-
Unclip cable channels - 3 -.
-
Route wiring harness - 2 - through cable guide - 7 -.
2
-
Cable harness
3
-
Cable channel (Qty. 6)
4
-
Rear interior lighting connector
5
-
Visor lighting connectors
6
-
Interior lighting connector
7
-
Cable guide
8
-
Cable to visor