A4 V6-3.0L (AVK) (2004)
-
Unclip C-pillar trim at clip - 4 - and remove it.
-
Installing:
CAUTION: Always follow installation sequence for C-pillar trim.
-
Raise rear shelf.
-
Position trim - 1 - into mounts at rear shelf.
-
Install clip - 4 - in its mount.
-
Press lower part of clip - 3 - together and insert clip again.
-
Reinstall two bolts - 2 -.
CAUTION: Ensure trim is held securely.
-
Secure rear shelf and side upholstery.
2
-
Screws, (2x)
-
Tightening torque 4 Nm
-
Self-locking
-
Replace after each disassembly
-
Threaded holes for screws must always be cleaned (for example, with thread cutter)
3
-
Clip(Qty. 1)
4
-
Clamp(Qty. 1)