A4 V6-3.0L (AVK) (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Hydraulic Unit and Brake Lines
Hydraulic unit and brake lines
The tightening torque for all brake lines on the Audi A4 is 15 Nm.
1. Brake master cylinder and brake servo
2. Brake line
^
Brake master cylinder/push rod piston circuit to hydraulic unit
3. Brake line
^
Brake master cylinder/floating piston circuit to hydraulic unit
4. Brake line
^
Hydraulic unit to front left brake caliper
5. Brake line
^
Hydraulic unit to front right brake caliper
6. Brake line
^
Hydraulic unit to rear right brake caliper
7. Brake line
^
Hydraulic unit to rear left brake caliper
8. Sender 1 for brake booster -G201
^
Bolted onto hydraulic control unit
9. Hydraulic control unit -N55- with ABS
^
Control Module (w/EDL -J104)
10. Locking clip
11. Buffer (4x)
12. Vacuum pump
13. Buffer (1x)
14. Hex bolt, 10 Nm (3x)
15. Bracket