audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Brake System, Bleeding|Page 9947 > < ABS System Components on Rear Axle ,Removing and Installing|FWD|Page 9942
Page 1
background image

Brake Bleeding: Service and Repair
Brake System, Bleeding

Brake system, bleeding

WARNING:  
^

Do not under any circumstances allow brake fluid to come into contact with liquids which contain mineral oils (e.g. oil, gasoline, cleaning agents).
Mineral oils damage the plugs and seals in the brake system.

^

Brake fluid is poisonous and must on no account be siphoned by mouth through a hose. Because of its caustic properties it must also not come into
contact with paintwork.

^

Brake fluid is hydroscopic, i.e. it absorbs moisture from the surrounding atmosphere. It is thus always to be kept in containers with an air-tight
seal.

^

Always observe the relevant environmental regulations for disposal.

Notes:  
^

Only use fresh brake fluid as per US Standard FMVSS 116DOT4.

^

Genuine VW/Audi brake fluid complies with this specification.

^

Use plenty of water to Rush away any brake fluid spillage.

^

When the system is open do not work with compressed air and do not move the vehicle.

^

During the concluding road test, ensure that an ABS-controlled brake application is carried out at least once (can be felt from the pulsing of the
brake pedal).

Brake System, Bleeding|Page 9947 > < ABS System Components on Rear Axle ,Removing and Installing|FWD|Page 9942