A4 V6-3.0L (AVK) (2004)
-
Open the brake fluid reservoir.
-
Unplug the connector of the sender for the float warning indicator -1-.
-
Disconnect vacuum hose -2-.
-
Unscrew the bolt -1- attaching the brake fluid reservoir.
Notes:
^
Protect the plenum chamber against any escaping brake fluid.
^
The underside of the brake fluid reservoir clips into the brake master cylinder.
-
To remove reservoir] press down locking lug and at the same time pull brake fluid reservoir out of sealing plugs.
-
Pull off the brake fluid reservoir and lay it to one side.