A4 V6-3.0L (AVK) (2004)
Vacuum Brake Booster: Service and Repair
Brake Master Cylinder With Brake Servo, Removing and Installing
Brake master cylinder with brake servo, removing and installing
Special tools and equipment
^
Release tool T40024
Removing
-
Remove glove compartment driver's side.
Rotate the brake light switch -1- counter clockwise through 45° and pull it out.
-
Separate the brake pedal from the brake servo using release tool T40024.
-
Drawing off brake fluid with brake filler and bleeder unit VAS 5234
-
Take off the cover of the plenum chamber.
-
Lay out plenty of lint-free cloths in the area of the plenum chamber.
-
Open the brake fluid reservoir.