A4 V6-3.0L (AVK) (2004)
Coolant Line/Hose: Service and Repair
Front Coolant Line, Removing and Installing
Front coolant line, removing and installing
Special Tools and Equipment
^
3094 hose clamps
^
Oil receptacle
Removing
Note: All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.
^
Remove intake manifold.
^
Toothed belt, removing, Refer to Timing Belt, Service and Repair.
^
Remove camshaft gears from left cylinder head.
^
Unscrew bolts -1- and -2- and remove toothed belt guard at rear left.
^
Place oil pan underneath.
^
Clamp off two hoses at hydraulic fluid supply line using 3094 hose clamps.
^
Disconnect both hydraulic hoses from supply line.
^
Disconnect coolant hoses at front coolant pipe.