A4 V6-3.0L (AVK) (2004)
/Page-1360006.png)
Left-side cylinder head:
^
Insert T40030 camshaft adjuster gauge at camshafts.
^
Spread T40030 camshaft adjuster gauge with threaded shaft (tightening torque 10 Nm) until it is seated without axial play.
Right-side cylinder head:
^
Install camshaft gear of exhaust camshaft.
^
Turn exhaust camshaft (arrow 1 ) and intake camshaft (arrow 2) 30.in direction of arrow at the same time...
^
...until the cams (arrows) of cylinder 3 at intake and exhaust camshafts are as shown in the illustration.
^
Insert T40030 camshaft adjuster gauge at camshafts.
^
Remove exhaust camshaft gear again.
