A4 V6-3.0L (AVK) (2004)
^
Cut tube nozzle at front marking (jet diameter approximately 1 mm).
^
Apply silicon sealant bead to clean sealing surfaces of sealing flange as shown in illustration.
^
Thickness of sealant bead (arrows): approximately 1.5 mm
Note: Sealant bead must not be thicker than specified, otherwise sealant could get into oil pan and clog the oil pump strainer.
^
To install, slide guide sleeve from kit onto crankshaft.
^
Remove oil pan (upper part).
^
Install flywheel or install drive plate.
Tightening torque