A4 V6-3.0L (AVK) (2004)
Oil Filter: Service and Repair
Engine oil: Drain/extract, replace oil filter
Note: Perform oil change at operating temperature.
Special tools, testers and auxiliary items required
-
Hazet tension band 2171-1
or
-
Oil filter wrench 3417
-
Oil extractor V.A.G 1782
-
Oil Drain Adapter T 40057 (2.0 TFSI)
Note: Observe waste disposal regulations!
WARNING! Oil extraction not permitted with various engine types! See maintenance table.
6-cyl. 3.2L FSI gasoline engines
Note: Loosen the cap before draining / extracting, so that the engine oil can run out of the oil filter housing.
-
Remove coolant reservoir - 1 - and lay aside.
-
Remove oil filter cover with socket wrench SW 36 - 2 - .
-
Clean sealing surfaces oil filter cover and at oil filter housing.
-
Replace oil filter insert. .
Sealing ring on cap, replacing