A4 V6-3.0L (AVK) (2004)
-
Remove sealing ring at pull tab - arrow A - from cap - 1 - .
-
Insert new sealing ring - 2 - with semicircular profile in groove - arrow B - on cap.
The pull tab - arrow A - must face upward.
Smooth side of sealing ring - 2 - must face toward outside
O-ring, inserting in oil filter housing
-
Insert O-ring - 2 - in groove - arrow - on oil filter housing - 1 - .
Note: Observe waste disposal regulations!
-
Engage new oil filter insert in oil filter cover.
-
Install oil filter cover.
-
Install coolant reservoir.
-
Remove noise insulation.
-
Open oil drain plug on oil pan or extract engine oil.
-
Install oil drain plug.