A4 V6-3.0L (AVK) (2004)
/Page-1664002.png)
-
Remove cover -1- in engine compartment (right side).
-
Remove bolts for holding plate -3- for solenoid valves (arrows).
-
Disconnect intake air hose -1- at Mass Air Flow (MAF) sensor.
-
Remove hose -4- of crankshaft housing ventilation from air duct -2-.
-
Remove bolt (arrow) and disconnect air duct -2- at throttle valve control module.
-
Disconnect hose -1- from air duct.
NOTE: Illustration depicts air guide from rear with the engine removed.
-
Remove cover -1- in engine compartment (left side).
