A4 V6-3.0L (AVK) (2004)
-
Install transmission supports.
-
Install subframe.
-
Install drive axle.
-
Installing driveshaft.
-
Secure ATF lines.
-
Install exhaust system free of stress.
NOTE: Individual mounting components for exhaust system to transmission on vehicles with automatic transmission 01 V, See Fig. 6.
Fig. 6 Individual right mounting components for vehicles with automatic transmission 01 V
1
-
Washer
2
-
Bolt (25 Nm)
3
-
Spacer sleeve
4
-
Buffer
5
-
Strap
6
-
Spacer sleeve
7
-
Self-locking nut (25 Nm)
8
-
Compression spring
9
-
Spacer sleeve
-
Check ATF level.
Tightening torques
Component.........................................................................................................................................................................................................................Nm
Front exhaust pipe with catalytic converter to exhaust manifold..........................................................................................................................................27
Front exhaust pipe with catalytic converter to hanging strap................................................................................................................................................25
Mounting straps to transmission............................................................................................................................................................................................25
Drive axle protection to transmission...................................................................................................................................................................................23.