A4 V6-3.0L (AVK) (2004)
Air Register: Service and Repair
Footwell Vents Front, Removing and Installing
Footwell Vents Front, Removing And Installing
Removing
-
Remove glove compartment and center console:
-
Remove brace -A- for central tube (passenger side on center tunnel)
-
Remove screws -A- and -B- between brace -C- and the air conditioner.
-
Remove bracket -C- for central tube (driver's side on center tunnel).
-
Remove the two intermediate pieces for the air duct footwell vents rear.
-
Mark connector -A- and -B- of -G261- and -G262- (mix-up alert)
-
Disconnect harness connectors -A- and -B- from footwell temperature sensors.
-
Remove screws -C-.
-
Loosen wiring harness from footwell vent -D-.
-
Pull footwell vent slightly back and remove toward passenger footwell.
Installing