A4 V6-3.0L (AVK) (2004)
-
Note direction of arrow (fuel supply or fuel return system) on flange when installing
-
Clip onto fuel tank
7
-
Electrical harness connector
-
For fuel pump and Sender for fuel gauge -G-
-
Releasing, see Fig. 1
8
-
Locking ring
-
Remove and install using 3087 wrench
-
Tighten to 145 Nm
9
-
Suction jet pipe
-
To remove, press release button on connection piece
10
-
Suction jet pump
Fig. 1 Releasing connector
-
To disconnect multi-pin connector at fuel delivery unit, first release retaining catch. This can be done manually or by using a small screwdriver
-arrow-.