A4 V6-3.0L (AVK) (2004)
Tail Lamp: Service and Repair
Tail Light and Bulb Carrier, Removing and Installing
Tail Light And Bulb Carrier, Removing And Installing
Removing
-
Fold pre-punched area -1- of luggage compartment lining forward.
-
Remove bolt -3-.
-
Swivel tail light outward and disengage retaining pins from body.
-
Unplug connector at bulb carrier.
-
Press retaining catches inward -arrows-and take bulb carrier out of tail light unit.
-
Turn bulbs to remove them from their holders.
Installing
Install in reverse order, paying attention to the following:
NOTE: Make sure that seal between body and tail light housing is properly seated.
-
Position tail light on body and press retaining pins into holes.
-
Tighten bolts -3- to 6 Nm.