A4 V6-3.0L (AVK) (2004)
Accelerator Pedal Position Sensor: Testing and Inspection
Accelerator Position Sensor, Checking
Accelerator Position Sensor, Checking
Special tools and equipment
-
VAG 1526 A
-
VAG 1594 A
-
VAG 1598/31
-
VAS 5051 with VAS 5051/1
Both Throttle Position (TP) sensor -G79- and Sender -2- for accelerator pedal position -G185-are located on the accelerator pedal and completely
independently signal the driver's requirements to the engine control module. Both sensors are located in one housing.
Test sequence
-
Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 - Engine electronics" in selection. Ignition
must be switched on. See: Testing and Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/With Manufacturer's Scan Tool/Scan Tool
Connecting and Initial Checks/Connecting VAS 5051 Scan Tool
Display on VAS 5051: