A4 V6-3.0L (AVK) (2004)
-
Press release catches -arrows- and disconnect fuel line at Y-connector.
-
Remove sealing flange with fuel gauge sender II.
Installing
Install in reverse sequence; note the following points:
-
Fit new seal for flange of fuel gauge sender II in fuel tank opening (seal should be dry).
-
Note fitting position of flange of fuel gauge sender II:
-
Lug -2- on flange must be between tabs -1- and -3- on fuel tank.
NOTE: Arrow points in direction of travel.
-
Tighten locking ring (145 Nm).
-
Observe safety precautions after connecting the battery.
Tightening torques
Component
Nm
Locking ring for fuel delivery unit
145
Battery terminal to terminal post
6