A4 V6-3.0L (AVK) (2004)
-
Remove bolts or quick-release screws -1- and -2- and remove front noise insulation.
-
Disconnect electrical harness connector -3-.
-
Disconnect air hoses -1- and -2-.
-
Remove bolts which are accessible from bottom for secondary Air Injection (AIR) pump bracket.
-
Remove Secondary Air Injection (AIR) Pump Motor -V101- with bracket.
-
If necessary, separate Secondary Air Injection (AIR) Pump Motor -V101- from bracket.
Installing
Installation is performed in the reverse order of removal.
Tightening torques
Component.........................................................................................................................................................................................................................Nm
Motor for Secondary Air Injection (AIR) to bracket.............................................................................................................................................................10
Bracket for motor for Secondary Air Injection (AIR) to chassis..........................................................................................................................................10.