audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Canister Purge Control Valve|Locations > < Emissions - EVAP Leak Detection Pump Quick Check|Page 6571
Page 5
background image

If hose and connection at pump are OK:

-

Replace pump.

-

Recheck using "071" again and verify that new LDP operates correctly.

-

Reinstall fuel cap.

-

Remove clamp and check entire EVAP system.

-

Erase any stored DTCs.

When procedure applies to vehicles within the New Vehicle Limited Warranty, use the table.

Canister Purge Control Valve|Locations > < Emissions - EVAP Leak Detection Pump Quick Check|Page 6571