A4 V6-3.0L (AVK) (2004)
Evaporative Emission Control Canister: Service and Repair
EVAP Canister, Removing and Installing
EVAP Canister, Removing And Installing
NOTE: Checking seal, performing diagnostic leak test.
Removing
-
Remove EVAP canister cover at bottom of spare tire well.
-
Remove sealing pieces above ventilation lines.
-
Remove connection hose -1- at ventilation line.
-
Disconnect ventilation lines -2- and -3-. To do so, press release ring -4- in direction of arrow -A- and pull off ventilation line -B-.
-
Remove pin bolts (arrows) and remove EVAP canister.
Installing
Installation is reverse of removal, noting the following:
NOTE: Secure all hose connections using hose clamps appropriate for the model type.
Tightening torques
Component
Nm
EVAP canister to chassis
16
Cover for EVAP canister
9