A4 V6-3.0L (AVK) (2004)
Side Air Bag: Locations
Side Airbag (Power Seat), Assembly Overview
Side Airbag (Power Seat), Assembly Overview
WARNING: Observe safety precautions for working on airbags and side airbags.
1
-
Driver-side airbag (passenger-side airbag similar)
See Cautions before beginning repairs on electrical system
-
Removal
-
Disconnect battery Ground (GND) strap.
-
Remove seat.
-
Remove backrest panel.
-
Remove boot -4-.
-
Remove wiring harness -5- upward.
-
Remove nuts -2- (2x) of side airbags -1-.
-
Pry metal strap out -3-.
-
Remove side airbag -1-.
-
Remove clip -6- and carefully remove wiring harness -5-.
-
Installing
-
Installation is the reverse of removal.
-
Ensure that the wiring harness -5- runs between seat frame and plastic guide -7-and that no tension is applied to the cable.
-
Secure clip -6-.
-
Switch ignition on.
WARNING: No person may be inside the vehicle when connecting the battery.
See Cautions for connecting Telematics battery