A4 V6-3.0L (AVK) (2004)
/Page-4483002.png)
A - with deployed airbag control module
-
Connect a suitable vehicle diagnostic tool, e.g. Vehicle Diagnosis, Testing and Information System VAS 5051 A and tap "15-airbag" in vehicle
system selection. Ignition must be switched on.
Front belt tensioner:
-
Read measuring value block display group 001:
You can recognize deployed belt tensioners by display "too great".
Rear belt tensioner (versions depending on equipment/country):
-
Read measuring value block display group 002:
You can recognize deployed belt tensioners by display "too great".
B - with replaced airbag control module:
-
Connect a suitable vehicle diagnostic tool, e.g. Vehicle Diagnosis, Testing and Information System VAS 5051 A and tap "15-airbag" in vehicle
system selection. Ignition must be switched on.
-
Retrieve DTC memory:
You can recognized deployed belt tensioners by malfunction message "Belt tensioner-resistance value too great".
-
If needed (visual inspection), the following must also be replaced: All damaged components.
After replacing airbag units or control module, Attach stickers (only tear-off strips) to registration card and return registration card to relevant Sales
Center or to Importer for registration.
