A4 V6-3.0L (AVK) (2004)
/Page-4580003.png)
-
Illustration shows tether anchors on seat back for TT coupe.
Lower anchors
All CR's manufactured after September 1, 2002 must have lower anchor attachments for the LATCH system. They must also continue to be capable of
installation using the vehicle safety belts.
It is important to note that CR manufacturers began to provide such lower anchor attachments for the LATCH system in the year 2000 even before the
required date.
Lower anchors secure the CR in the seat without using the vehicle's safety belts. Anchors provide a secure and easy-to-use attachment and minimize the
possibility of improper CR installation.
Lower anchor attachment points are located between the rear seat back and rear seat cushion for the outboard seating positions.
-
Illustration shows location of lower anchors for the rear seat.
Model Status - US
Top Tether anchors for rear seating positions:
^
Standard for all seating positions beginning m.y 2000
^
Can be retrofitted in earlier models (see table)
Lower anchors in rear outboard seating positions:
^
Can be retrofitted beginning m.y 1999 except, A8L (long wheel base) and TT (see table)
Model Status - Canada
Top Tether anchors for rear seating positions:
