A4 V6-3.0L (AVK) (2004)
Seat Belt: Locations
Right and Left Rear Belt Guides, Assembly Overview
Right And Left Rear Belt Guides, Assembly Overview
1
-
Rear belt guide
-
Removal
-
Remove side panel.
-
Remove C-pillar trim.
-
Remove rear three-point seat belt.
-
Remove foam piece -4- from lower part of guide, if installed.
-
Remove two phillips-head screws -2- out from below.
-
Remove belt guide -1-.
-
Installing
-
When installing belt guide, ensure that both washers -3- lie on the underside of belt guide.
-
Press belt guide into its locking mechanism, so that the catches -5-engage audibly.
-
Install phillips-head screw -2- again.
-
Place foam piece -4- again into belt guide -1-.
-
Install again all removed parts remaining.
2
-
Phillips-head screws (2x)
3
-
Washers (2x)
4
-
Foam piece
-
dependent on construction version
5
-
Catch